Life span:

It can be used for 2-3 years on the basis of one 4 kg laundry per day. Over 4 kg use 2 Laundry Balls . To safeguard its efficiency: place the Laundry Ball in the sun for 1 hour every month to regenerate the ceramic micro balls. Wash your Laundry load for a minimum of 35-40 Minutes to get the best effect, and only fill the water above the Laundry load, to much water can have a influence on the effectiveness of the Laundry Ball. 

As in clothing and laundry, your washing machine will also have a build-up of washing powder and detergents.  To remove this build-up use two cups of vinegar and rinse it through the machine.  Repeat once more with the vinegar and rinse then with clean water.  This will remove years of washing powder build up from your machine. Laundry Ball does not only improve health, saves money and time, but also lengthens the life of your washing machine!


GreenTech Fuel Saver


    

Installation Procedures:

1) Install the GreenTech Molecule Enhacer
Warning: Gasoline (Petrol) and Diesel are hazardous substance and must be handles with extreme care. We strongly recommended our customers could perform this installation in the professional maintenance store.


 

  

The GreenTech Molecule Enhancer has to be placed inside the fuel tank. Usually, there are three ways to install the GreenTech Enhancer. The workshop or mechanic will need to identify the most suitable installation procedures:

- Through the sender or fuel pump via access plate. An access plate is usually under the back seat or in the boot.

- Through the neck of the tank by removing the anti-siphon.

- Through the sender or fuel pump by removing the fuel tank.

Note: This method is only used if you can see the fuel directly from the tank filter and there is no anti-siphon device.
For example, most of the motorcycles and huge trucks are suitable for this method.


2) Install the GreenTech Air Refining Device
Install the GreenTech Air Refining Device into the air intake cube or inside the air filter housing. It is mounted on the pre-filtered (before the air is filtered) area of the air filter. Please find suitable location to attach the GreenTech Air Refining Device. You may also use the supplied cable tie to secure it.

         

        


Wireless Alarm



Activation the Moletech Alarm:

 

1. Insert the key and turn to OPEN
2. Open the lock body
3. Put the C type lock onto the steeling wheel
4. Lock body will blare one “beep” sound
5. Moletech Wireless Alarm is activated

Deactivation:


 

1. Press the Cancel button on the wireless pager
2. Insert key and turn to OPEN to open the Moletech Wireless Alarm lock body
3. Remove the C type lock from the steeling wheel and put the C type lock back to the lock body
4. Lock body will blare two “beep” sounds
5. Moletech Wireless Alarm is deactivated

FT Electrical Saver



The FT Electrical Saver is a simple device that is plugged into the socket nearest the Distribution Board in one’s home. It does not need the services of an electrician. Simply plug it in and leave it. The unit needs a good 7-10 days to “settle in”.